Part number 700-759 is a groove pin. This is a type of cylindrical fastener with a longitudinal groove along its side, designed to be pressed into a drilled hole. It is compatible with a wide range of airless sprayer models, including 330, 340, 440 series, 540, 550, 640 series, 660, 690, 740 series, 840 series, 1100, 1140 series, Advantage GPX 85, Epic series, Helix FR/VR, Impact series, Performer series, PowrLiner series, PowrTex, ProMark II, RentSpray series, and SprayTech GPX 85. The pin acts as a semi-permanent fastener, dowel, or hinge pin to secure components without threading.
| Part Number | 700-759 |
|---|---|
| Part Description | Groove Pin |
| Condition | New |
Part number 700-759 is a groove pin, also known as a spring pin or roll pin. This is a versatile, hollow cylindrical pin made of spring steel with a longitudinal slot. It is designed to be compressed and pressed into a hole of slightly smaller diameter, where it exerts outward pressure to hold itself securely in place.
This pin is a common general hardware item used across a vast number of airless sprayer models from various series including 330, 340, 440, 540, 640, 740, 840, 1140, Epic, Helix, Impact, Performer, PowrLiner, RentSpray, and SprayTech GPX 85. It is used to secure linkages, levers, brackets, and other components. A missing or sheared groove pin can cause parts to become loose or misaligned, leading to operational failure.
| Semi-Permanent Fastener | Secures two or more parts together with a tight friction fit. |
|---|---|
| Hinge / Pivot Point | Acts as a shaft for levers, linkages, or other moving parts to rotate on. |
| Alignment Dowel | Ensures precise alignment of components during assembly. |
| Shear Protection | Designed to shear under extreme overload, protecting more expensive components. |
| Missing Pin | Original pin is lost during disassembly or has fallen out. |
|---|---|
| Sheared/Broken Pin | Pin is found broken or has sheared due to excessive force. |
| Loose Components | A linkage or bracket is wobbly because the pin is worn or undersized. |
| During Reassembly | Whenever a component held by a groove pin is serviced, a new pin should be used. |
Groove pin 700-759 is a universal hardware component used in numerous airless sprayer models. The following is a partial list of compatible equipment.
| Compatible Sprayer Models (Partial List) |
|---|
| 330 Airless Sprayer |
| 340 Airless Sprayer International Model |
| 440 i, IX, XC, i1 series |
| 540 IX, 550 XC |
| 640 i, IX; 660 XC; 690 GXC |
| 740 i, IX series; 840 i, IX series |
| 1100 XC; 1140 i, ix, IX series |
| Advantage GPX 85; Airless Sprayer1200 GXC |
| Epic 447ex, 447HPX, 660ex, 660HPX, 690 GX, 1200 HPG |
| Helix FR; Helix VR |
| Impact 340, 400, 410, 440 service, 640 I/IA, 640, 740-840, 1140 I/IA |
| Performer 640 i; Performer 1140 ix |
| PowrLiner 1800M, 2800M, 2800, 2850 GB_D_F, 3100 |
| PowrTex 1200SF; ProMark II |
| RentSpray 450, 500, 600, 600 Impact, 650, Plus; Rentspar 700 |
| SprayTech GPX 85 |
Groove pins are often used in conjunction with other common fasteners and hardware.
Used in similar linkage applications; a groove pin might replace a clevis pin in some designs.
The mechanical parts that the groove pin secures or acts as a pivot for.
The tool required for proper installation and removal of the pin.
Copyright © 2024 AlltitanParts.com - All Rights Reserved.
